[GUIDE] Install on ODROID U3

[GUIDE] Install on ODROID U3

Postby woody » Tue Feb 17, 2015 6:05 pm

Hi Everyone!

Thought I would share my experience using this cool software and post a basic guide to installing it onto the ODROID U3. I am assuming you know how to image Micro SD cards, and have experience with ODROID and Linux.
  1. Image and boot Minimal Ubuntu Sever 14.04 LTS
    http://forum.odroid.com/viewtopic.php?f=8&t=4613
  2. Get the OS updated
    Code: Select all
    sudo apt-get -y update && sudo apt-get -y dist-upgrade
  3. Sort out a few pre-requisites
    Code: Select all
    sudo apt-get -y install alsa-base #ExaGear might complain if this isn't installed.
    sudo mkdir /etc/pulse #ExaGear might complain if this doesn't exist.
    cd #
    mkdir exagear
    cd exagear
  4. Copy the ExaGear tar.gz file and your key/license file into the newly created exagear directory using TFTP/SFTP/WinSCP/wget etc.
  5. Install!
    Code: Select all
    tar -zxvf exagear-desktop.tar.gz #extract archive contents
    sudo ./install-exagear.sh #run the automated installer
  6. Switch into the ExaGear Guest System
    Code: Select all
    exagear
  7. Verify the running platform
    Code: Select all
    uname -a

    [You should see something like the following...]
    Code: Select all
    Linux linaro-server 3.8.13.18 #1 SMP PREEMPT Sat Mar 8 10:56:04 CET 2014 i686 i686 i386 GNU/Linux
Crossed fingers this guide helps you, and your installation goes smoothly.

For more information about prerequisites, installation, running, administration and removal, there is a PDF guide bundled with your installation archive.

Good luck and enjoy :)
woody
 
Posts: 1
Joined: Thu Feb 12, 2015 7:43 am

Return to ExaGear Desktop

Who is online

Users browsing this forum: No registered users and 5 guests

cron