Error autoscript teamspeak 3

Error autoscript teamspeak 3

Postby illusionist » Mon Dec 05, 2016 6:49 am

hello all,

I installed my teamspeak 3 server according to the Eltechs manual. Everything is working fine and me and my friends can connect to the server :)

The only problem is that i can not make an autoscript it get an error in the end :(
[color=#FF0040]
pi@raspberrypi:~ $ wget http://s3-us-west-2.amazonaws.com/exage ... teamspeak3
converted 'http://s3-us-west-2.amazonaws.com/exagear-ts3-3.0.13/teamspeak3' (ANSI_X3.4-1968) -> 'http://s3-us-west-2.amazonaws.com/exagear-ts3-3.0.13/teamspeak3' (UTF-8)
--2016-12-05 13:02:53-- http://s3-us-west-2.amazonaws.com/exage ... teamspeak3
Resolving s3-us-west-2.amazonaws.com (s3-us-west-2.amazonaws.com)... 54.231.168.204
Connecting to s3-us-west-2.amazonaws.com (s3-us-west-2.amazonaws.com)|54.231.168.204|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 924 [application/octet-stream]
Saving to: 'teamspeak3'

teamspeak3 100%[=====================>] 924 --.-KB/s in 0s

2016-12-05 13:02:54 (28.6 MB/s) - 'teamspeak3' saved [924/924]

pi@raspberrypi:~ $ sudo mv teamspeak3 /etc/init.d
pi@raspberrypi:~ $ sudo chmod 755 /etc/init.d/teamspeak3
pi@raspberrypi:~ $ sudo update-rc.d teamspeak3 defaults
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_GB.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
pi@raspberrypi:~ $
[/color]



I hope there will be some feedback to fix this problem!

Thanks in advance
illusionist
 
Posts: 2
Joined: Mon Dec 05, 2016 6:45 am

Re: Error autoscript teamspeak 3

Postby goha » Wed Dec 07, 2016 12:50 pm

Hello illusionist!
This is a warning message, not error message. And maybe not connected to Teamspeak at all. It just appears whenever you call perl.
Please reboot your device and check if Teamspeak actually autostarts or not.
goha
 
Posts: 158
Joined: Wed Oct 08, 2014 9:22 am


Return to ExaGear Desktop

Who is online

Users browsing this forum: No registered users and 2 guests